Step by step procedure of constructing a house

Although, for building construction requires lots of time and it is tedious work, yet its result is a permanent asset for us. Therefore, care should be taken in building construction process. Before planning, building construction projects must consider important aspects like the purpose of construction, utility, financial proficiency, the demand for work, etc. 

As the decision of building construction taken, the planning phase is started. First of all start with some pre-construction steps.

Building Construction Step Phase – 1 or Pre-construction Phase:

The following are the building construction steps.

1) To Acquire Land or Plot:

It is the most important step in building construction. Search for the location for the building which is best suited for building construction purposes. Be careful while selecting land which has all the desired facilities available nearby and should be free from all land-related issues. It is suggested that do prior data collection before buying land or plot either by doing research online or seek help from real estate agents or concerned persons regarding the effective cost of the same.

2) To Seek Technical Help: 

After selecting proper land for building, take the help of a professional architect to create building designs and take his/her advice. An architect prepare plan as per building requirement, number of flats, shops based on your requirements and budget. Then after architect consult with a structural engineer for details of the reinforcements to be used, how deep your foundation will be, the size of gravel to be used, pillar width, etc.

3) Preparing Estimate and Budget:

Building construction involves a huge amount of material and budget. After, planning and structural detailing completed these details are transferred to the building estimator. The building estimator will estimate the material quantity, quantity of different items of work, and prepare an abstract sheet that shows the cost of building construction. If financial resources are limited, we need to seek pre-approval for loans in advance or else you may end up in a cash crunch situation.

4) Permission from Authorities

This is important work to do after the project is ready to be executed. For that, we have to take permission from the local municipal body before you could go for the construction.

Following are the list of document project required before applying for permission. This document may differ from state to state, but some are essential for every building construction work.

a) Land survey: Survey of the land has to be carried out with the help of authorized land surveyor

b) Land documents.

c) Architecture/ elevation/ sectional drawings.

d) Structural report.

e)  Architect Certificate of undertaking on Record and Certificate of the undertaking of Civil Engineer on Record

5) Approach a Builder: 

A builder or contractor for construction must be chosen carefully because it is a major factor for securing building construction quality and timely construction of work. Pre investigation must be done about the builder before handing work. In the contract document, all the work-related details must be clearly stated. The contract document should cover layout and work details along with the payment methods, time scales and costs. The condition of the contract should be thoroughly checked before signing a final deal.

Building Construction Step Phase:

The following are the building construction step involves for any type of construction.

1) Site Preparation or Leveling:

The construction site must be cleaned before the work is executed. This work involves the removal of roots of trees, debris and leveling ground area.

2) Excavation and PCC:

The foundation of building ground is excavated with the help of excavating machines as per the building dimension specified in drawings. In this foundation trench, a layer of PCC (Plain cement concrete) is laid in the dug portion before placing the reinforcements for the foundation.

3) Foundation:

Building Foundation

The building is supported on the foundation is the lowermost part of the building that is in contact with the soil. A building is load transferred from the superstructure to the soil and needs to be extremely strong to handle the load. After the PCC work foundation reinforcement work is started. The foundation bottom level must check before concreting it. The remaining space between the foundation is filled with earth.

4) Plinth Beam and Slab:

building construction
Plinth Beam

After the foundation work is done ground beam formwork preparation is started and poured with concrete. Over the plinth beam, masonry work is started. And space between foundation and plinth beam filled with soil.

5) Superstructure – Column:

The superstructure is the portion above the plinth level of the building. The main component of the superstructure is a column and beam.  The columns are built up to slab level and the frame for further construction is prepared.

6) Masonry:

As column and beam framework completed masonry work is started with different materials such as bricks, concrete blocks, fly ash bricks, etc. according to building drawing. Masonry work is done using a cement mortar mix. It is a mixture of cement & sand. During this carefully and as per drawing gaps are laid for doors and windows during the masonry work.

7) The lintel over door window gaps:

The lintel is constructed on the door and window to support the masonry work over it. After this further masonry work is done.

8) Floor slab or Roof structure:

Then the formwork is started to construct slab resting on the column and beam. Over slab formwork, slab reinforcement is placed as per slab detailed drawing.

9) Door window framing and fixations:

After that door window frames are fixed at their specified position given in drawing.

10) Electrical and Plumbing:

building construction
Electrical Pipe in Slab

As we know that buildings are constructed with a clean finish in which electrical and plumbing work is not visible. They are installed in the walls and slabs such that they are concealed and not visible after the finishing work is done. The point and pipe end left out such that later they can be finished with the electric fitting and plumbing fixtures.

11) Exterior Finishing:

Once this work is completed, external plastering and finishing work is started. Waterproofing is also done to prevent rising dampness in the wall. External cladding can also be done to enhance the elevation of the house.

12) Terrace and Roof Finishing:

On top of the slab, waterproofing is done to prevent any leakage in the slab. Generally, terrazzo tiling is done to prevent the slab from a weathering effect.

13) Internal Finishing:

Internal walls are plaster with smooth finish and flooring is done with tiles. Later on, the walls are painted or textured.

14) Woodwork and Fixture Fittings:

By following the above step, almost construction work is completed and then after furniture work is started. Side by side, electrical fitting, switchboard, and plumbing fittings are complete in the bathrooms and kitchen areas too.

The last step of building construction is interior decoration work in completing the building construction with proper furnishing and fabric used.

READ  How To File and Track Your Court Case Online Step by Step @KenyanTraffic

Price Based Country test mode enabled for testing United States (US). You should do tests on private browsing mode. Browse in private with Firefox, Chrome and Safari

%d bloggers like this: